Hi All
I am getting following error while starting SAP ERP service,
Here is dev_disp log:
Scheduler info
--------------
WP info
#dia = 10
#btc = 0
#standby = 0
#max = 21
General Scheduler info
preemptionInfo.isActive = true
preemptionInfo.timeslice = 500
preemptionInfo.checkLoad = true
Prio Class High
maxRuntime[RQ_Q_PRIO_HIGH] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 1800 sec
Prio Class Normal
maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
withPrioTickets[RQ_Q_PRIO_NORMAL] = true
Prio Class Low
maxRuntime[RQ_Q_PRIO_LOW] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_LOW] = 1800 sec
maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
withPrioTickets[RQ_Q_PRIO_LOW] = true
Running requests[RQ_Q_PRIO_NORMAL] = 0
Tue May 24 18:02:49 2016
Running requests[RQ_Q_PRIO_LOW] = 0
DpCommAttachTable: attached comm table (header=7f4e5d98a5b0/ft=7f4e5d98a5b8/fi=7f4e5dec53d0)
DpSockAttachTable: attached sock table (header=7f4e5df0c6b8/ft=7f4e5df0c6c0)
MBUF state OFF
DpCommInitTable: init table for 1500 entries
DpSockInitTable: init table for 1500 entries
EM: Initializing PROC storage: quota=0 use_stdheap=0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 21 initializing ....
<ES> EsILock: use Mutex for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4509MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4512MB
<ES> Info: disclaim threshold = 0 MB
<ES> Info: disclaim coasting/alloc = 300 s
<ES> Info: disclaim coasting/free = 0 s
<ES> Info: blockdisclaimsize_KB = 0 KB
Using implementation std
<ES> Info: use mapped file
EsStdUnamFileMapInit: ES Segment = 0x7f4d321f4000 - 0x7f4e4c1f4000
EsStdInit: Extended Memory 4512 MB allocated
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 1127 blocks reserved for free list.
ES initialized.
mm.dump: set global maximum dump mem to 192 MB
EsRegisterEmCheck: Register EmGetEsHandles at 13cfc52
rdisp/calculateLoadAverage : 1
rdisp/snapshot(CREATE): DP_CS_RESOURCES_EXHAUSTED
rdisp/snapshot(PERIOD):300 sec
rdisp/snapshot(LINES):10000 lines
rdisp/snapshot(C-STACK):C-STACK = YES
***LOG Q0I=> NiPConnect2: 127.0.0.2:3901: connect (111: Connection refused) [/bas/745_REL/src/base/ni/nixxi.cpp 3375]
*** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 17/sock 10
(SI_ECONN_REFUSE/111; I4; ST; 127.0.0.2:3901) [nixxi.cpp 3375]
*** ERROR => MsIAttachEx: NiBufConnect to hdb2015/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 878]
Tue May 24 18:02:49 2016
***LOG Q0L=> DpLoopInit, nomscon () [dpInit.c 3888]
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=2718 reserved=815 quota=10%
DpAsCreate: forked gwrd (pid 6651)
DpIcmCreate: forked ICM (pid 6652)
DpWpDynCreate: created new work process W0-6653
DpWpDynCreate: created new work process W1-6654
DpWpDynCreate: created new work process W2-6655
DpWpDynCreate: created new work process W3-6656
DpWpDynCreate: created new work process W4-6657
DpWpDynCreate: created new work process W5-6658
Tue May 24 18:02:50 2016
DpWpDynCreate: created new work process W6-6659
DpWpDynCreate: created new work process W7-6660
DpWpDynCreate: created new work process W8-6661
DpWpDynCreate: created new work process W9-6662
DpWpDynCreate: created new work process W10-6663
DpWpDynCreate: created new work process W11-6664
DpWpDynCreate: created new work process W12-6665
DpWpDynCreate: created new work process W13-6666
DpWpDynCreate: created new work process W14-6667
DpWpDynCreate: created new work process W15-6668
CGROUPS: changing prio of pid 6621 to medium
CGROUPS: disabled
**START Linux Memory Parameter Check
virtual memory: hard-limit = UNLIMITED
virtual memory: soft-limit = UNLIMITED
core size: hard-limit = UNLIMITED
core size: soft-limit = 0 MB
data segment size: hard-limit = UNLIMITED
data segment size: soft-limit = UNLIMITED
stack size: hard-limit = UNLIMITED
stack size: soft-limit = 8 MB
max open files: hard-limit = 32800
max open files: soft-limit = 32800
Page Size: 4 KB
kernel.shmmax = 8796093022207 MB
kernel.shmall = 4503599627370495 MB
**END Linux Memory Parameter Check
Linux scheduler "SCHED_OTHER" used with prio 0
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
Tue May 24 18:02:52 2016
CCMS: start to initalize 3.X shared alert area (first segment).
DpCheckPreemptionTicker: created thread for DpPremptionTicker
Tue May 24 18:02:54 2016
*** ERROR => DpHdlDeadWp: W0 (pid 6653) died (severity=0, status=65280) [dpxxwp.c 1395]
DpTraceWpStatus: child (pid=6653) exited with exit code 255
DpWpRecoverMutex: recover resources of W0 (pid = 6653)
********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - begin **********
Server hdb2015_ER1_00, Tue May 24 18:02:54 2016
Highly Appreciate your early response on this.
Best Regards
Liu